Widget HTML Atas

Ford Range Sensor Swap 95 To Wiring Diagram

Tiny

I attached the wiring diagrams from Ford on the transmission. Let me know if you need more info and we can get it for you. Thanks

FYI - The neutral safety switch on an automatic is called a digital transmission range sensor. Others call it a transmission position switch or just a range sensor.

Images (Click to enlarge)

SPONSORED LINKS

Saturday, April 25th, 2020 AT 12:53 PM

Tiny

FORDRIDINHIGH88

  • MEMBER
  • 1992 FORD F-250
  • 130,000 MILES

I have a 92 f-250 7.3L diesel and the wiring harness from the transmission somehow got wrapped around the axle and pulled some of the wires out of place. I can not find this particular wiring diagram anywhere is there any place that it can be located.

Thanks!

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

Hello,

Here are the transmission wiring diagrams and a guide to help you test the connections.

https://www.2carpros.com/articles/how-to-check-wiring

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Images (Click to enlarge)

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

J.STIEG

  • MEMBER
  • 1992 FORD F-250
  • 175,000 MILES

I am having some problems with my 92 ford truck I just put a transmission in it from a 94. I think the torque convertor lockes up right after I put it in gear. Connectors fit but looked different. Diagrams would help. Thanks!

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

Do wire colors in plugs match?

SPONSORED LINKS

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

There are only wires on one side.

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

And did you do any research as to interchangability before the swap?

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

What motor is in it. It's 2 or 4wd?

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

The salvage yard matched it up for me. It has a 5.0l engine. Maybe the range sensor is messed up or the wrong one.

I just need a diagram so I can see what I have. Can you help?

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

4wd as well.

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

Did you consider switching range sensors?

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

Yes, I will call the salvage yard tomorrow to see if they still have it. The truck will barely take off

SPONSORED LINKS

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

Does this help?

Image (Click to enlarge)

Thumb

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

That was 94 schematic, here is 92.

Image (Click to enlarge)

Thumb

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

I found out whats going on but not shure whats causing it. The engine is only running on 4 cylinders at times. The computers ground pulse is cutting out on cylinders 2, 3, 6, and 7. This is all happened when I put the transmission in. Truck runs bad now, Any ideas to further troubleshoot this problem?

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

I forgot to mention that it was the fuel injectors that are not being driven by computer.

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Tiny

Those cylinders are ground bank #2 from computer the other 4 cylinders are bank 1. Check output right at computer pin 69 (white wire) next to it is pin 68 (tan wire bank #1) if good wiring/connections are suspect.

Monday, July 27th, 2020 AT 5:11 PM (Merged)

Posted by: house-mall.blogspot.com

Source: https://www.2carpros.com/questions/transmission-wiring-diagram-needed